Digital products generally refer to machines that can be operated by numbers and codes and can be connected to a computer, such as MP3, U disk, smart phone, digital camera/camcorder/scanner, etc. However, in general, if such products want to be exported to the Japanese market, they need to apply for Japanese TELEC certification.
What is TELEC certification?
Japan’s "Radio Law" requires type approval (ie, technical regulatory compliance certification) for designated radio equipment. TELEC certification is mandatory. The certification body is the registered certification body TELEC (Telecom Engineering Center) recognized by MIC in the scope of designated radio equipment. It is the main registered certification body for the conformity certification of radio equipment in Japan. TELEC is also called MIC certification in Japan. TELEC is MIC is one of the designated issuing agencies, so it is collectively called TELEC certification.
TELEC certification standard
The certified technical standards refer to the classification and technical standards of designated radio equipment listed in the technical regulations compliance certification system on its official website. It is worth noting that if there are differences between these technical standards and the technical requirements of the "Radio Regulatory Commission Rules No. 18", the "Radio Regulations" shall prevail.
Digital product TELEC certification test project
1. Frequency Error Measurement (Frequency Error Measurement)
2. Coupling bandwidth/carrier frequency bandwidth test (Occupied Bandwidth and Spread-spectrum Bandwidth / Factor)
3. Unwanted Emission Intensity Measurement (Unwanted Emission Intensity Measurement)
4. Antenna Power Error Measurement (Antenna Power Error Measurement)
5. Receiver spurious disturbance test (Limitation of Collateral Emission of Receiver Measurement)
6. EIRP antenna power test (Transmission Antenna Gain (EIRP Antenna Power) Measurement)
7. 3dB lobe bandwidth test (Transmission Radiation Angle Width (3dB Beamwidth) Measurement)
8. Duty Cycle Measurement
9. Retention time test (retention time)
Digital product TELEC certification process
1. The applicant signs a certification contract with the designated testing agency and pays a 50% certification deposit
2. The applicant shall provide the test prototype, application form and certification materials to the handling agency
3. The testing agency starts the test, issues a test report, and submits the application to the RCB agency
4. After the review is completed, the certificate is issued, the balance is paid, the certificate is sent by the testing agency, and the case is completed.
For digital product TELEC certification, please contact our company ZRLK. We will provide you with professional and efficient testing and certification services, with favorable prices and courteous service. If you provide us with product pictures and specifications, we will give us the corresponding cycle, quotation and specific plan according to your product. Welcome to inquire!
